Skip to content

JK-BMS Connection ​

The ESP32 gateway communicates with the JK-BMS over Bluetooth (BLE). No communication cable is required between the gateway and the battery.

Before You Start ​

  • Confirm your BMS is a JK-BMS.
  • The JK-BMS must be powered and awake so it advertises over Bluetooth.
  • The gateway needs a stable power supply (USB-C or a regulated supply).
  • The gateway scans for the JK-BMS Bluetooth advertisement (service UUID 0xFFE0) and connects automatically.
  • Leaving the BMS address unset uses auto-discovery of the strongest nearby unit; set an explicit BMS Bluetooth address in device settings to pin one pack.
  • The connection is read-only: the gateway only reads telemetry and never writes settings to the battery.

Enabling It ​

  1. Power the gateway and confirm it is online in the dashboard.
  2. Make sure the JK-BMS is powered and in Bluetooth range of the gateway.
  3. Confirm telemetry appears in the dashboard. Link state, address, and RSSI are visible in device diagnostics.

Safety Warnings ​

  • Do not open the battery pack to add wiring; the link is wireless.
  • Do not connect battery pack voltage to the ESP32.
  • Keep the gateway physically clear of high-current battery wiring.